Bone Densitometry

What is Bone Densitometry?

Bone Densitometry is performed to detect bone loss. One of the most important things about human health is bone development. Problems such as loss of bone mass may occur in humans. We perform this procedure in our health center for the measurement of bones. It is extremely beneficial to do this procedure to prevent bone loss.

If a person has bone loss and no measures are taken for this loss, the problem may become more serious. Our health center Lab Sapphire bone densitometry by X-rays, we can scan through. With the use of a minimum level of radiation, no serious harm will occur. The screening can be quite extensive. With the measurement process we carry out, if you have a disease, we will detect it and start treatment as early as possible.

Brief Information about Bone Densitometry!

Densitometry of bone, also called dual-energy x-ray absorptiometry, DEXA or DXA, uses very small doses of ionizing radiation to produce pictures of the inside of the body (usually the lower (or lumbar) spine and hips) to measure bone loss.

It is widely used to diagnose osteoporosis to assess an individual’s risk of developing osteoporotic fractures. DXA is simple, fast and non-intrusive. It is also the most widely used and most standard method for diagnosing osteoporosis.

This exam requires little or no special preparation. Tell your doctor and technician if you are likely to be pregnant or if you have recently had a barium examination or received a contrast agent injection for a CT or radioisotope scan.

You should leave your jewelry at home and come with loose-fitting clothes. You may be asked to wear an apron. You should not take calcium supplements at least 24 hours before the exam.

Bone density scanning, also called dual-energy x-ray absorptiometry (DXA) or densitometry of bone, is an advanced form of x-ray technology used to measure bone loss.

DXA is today’s established standard for measuring bone mineral density (BMD).

An X-ray examination helps doctors diagnose and treat medical conditions.

It exposes you to a small dose of ionizing radiation to produce pictures of the inside of the body. X-rays have been effectively used in the field of medical imaging for a long time.

DXA is performed most often on the lower spine and hips. In children and some adults, sometimes the whole body is scanned.

Peripheral devices using X-rays or ultrasound are sometimes used to scan for low bone mass, mostly in the forearm.

In some communities, a CT scan with special software can also be used to diagnose or monitor low bone mass (QCT). This is true, but it is used less often than DXA scanning.

How is Bone Densitometry Performed?

Measurement operations can be carried out in a practical way within the scope of developing technologies. We perform screening and measurement procedures in our health center to detect conditions such as bone resorption, bone pain and fracture.

This method is called DEXA. This method is widely preferred and is very useful for bone health.

During the bone densitometry procedure, our patients lie horizontally on the stretcher and the test is performed in this way. With this procedure, it is possible to prevent bone loss from occurring.

During the procedure, which will take an average of 10 minutes, the patient should stand steadily without moving the patient. The measurement is made using a beam source. We provide services with advanced equipment and expert medical personnel in our health center.

Bone measurement is performed to detect osteoporosis before broken bone formation occurs. This test helps to estimate the density of your bones and your chances of breaking a bone.

The NOF recommends a bone density test of the hip and spine by a central DXA machine to diagnose osteoporosis.

DXA stands for dual-energy x-ray absorptiometry. By taking a bone density test, you can find out if you have osteoporosis or if you should worry about your bones. Some people also call it a bone mass measurement test.

This test uses a machine to measure your bone density. It estimates the amount of bone in the hip, spine, and sometimes other bones. Your test result will help your healthcare provider make recommendations to help you protect your bones.

Why is Bone Densitometry Performed?

Bone loss is one of the countless health problems that people can experience. Especially in women, bone mass losses can occur after the age of 40.

In order for these bone losses to be treated without pain or pain, bone densitometry should be performed.

As Safir Lab, we also perform this procedure for conditions such as calcium deficiency or malnutrition.

It is very important to make an early diagnosis for osteoporosis. Screening may be required for this purpose. If you have a problem such as a bone fracture or hip fracture, measurement may also be needed for this

. One of the reasons why this test is performed in our health center is that women enter early menopause. We make measurements to detect and treat many problems related to bones.

In addition to these, if you want to do a health check, you can also have a bone measurement done. It is an important screening in checking the general health status.

DXA is mostly used to diagnose osteoporosis, a condition that affects women after menopause, but can also be found in men and rarely in children.

Osteoporosis involves a gradual loss of bone, as well as structural changes that cause bones to become thinner, more fragile and more likely to break.

DXA is also effective in monitoring the effects of treatment for osteoporosis and other conditions that cause bone loss.

The DXA test can also assess a person’s risk of developing fractures. The risk of fracture is influenced by age, body weight, previous fracture history, family history of osteoporotic fractures, and lifestyle problems such as smoking and excessive alcohol consumption.

These factors are taken into account when deciding whether a patient needs treatment or not.

A bone density test is strongly recommended in the following cases:

• A postmenopausal woman and if she is not taking estrogen
• If there is a personal or maternal history of hip fracture or smoking
• In a postmenopausal woman who is tall or short
• Rheumatoid arthritis is a man who has clinical conditions associated with bone loss, such as chronic kidney or liver disease.< / li>
• corticosteroids such as prednisone, Dilantin and certain barbiturates such as various anti-seizure medications, or high-dose thyroid replacement medications, including medications that are known to cause bone loss if you are using
• If you have type 1 (formerly juvenile or insulin-dependent) diabetes, liver disease, kidney disease, or a family history of osteoporosis.< / li>
• Has a high bone turnover, which is manifested in the form of excess collagen in urine samples.< / li>
• If you have a thyroid condition such as hyperthyroidism
• If you have a parathyroid condition such as hyperparathyroidism
• If you have experienced a fracture after only a slight trauma
• If you have X-ray evidence of a spinal fracture or other signs of osteoporosis

Vertebral Fracture Assessment (VFA), a low-dose X-ray examination of the spine to scan for vertebral fractures performed on a DXA machine, may be recommended for elderly patients, especially in the following cases:

• If you have unexplained back pain
• If the DXA scan gives readings at the border.< / li>
• If DXA images of the spine suggest a vertebral deformity or fracture

How is Bone Densitometry Performed?

The procedure, which can be explained as a scan of the bones, is performed quickly. There are two different methods available to perform this operation.

The most commonly used method is called DEXA. The use of X-rays is performed in the scan. Our health center completes the procedure within 15 minutes on average and makes the measurement.

The shooting is done using a moving camera. At this time, the patient lies motionless. The least amount of radiation is used in bone densitometry shooting.

In this way, it comes to the fore as a reliable operation. The second bone measurement method is QCT. QCT is performed through computed tomography. No significant preparation is required before the scan.

Bone Densitometry Results

It is very important to make an early diagnosis in order to treat diseases. Thanks to early diagnosis, treatments can be performed more quickly and easily.

Bone measurement is commonly used for early treatment of bone diseases. The results of this procedure, also called bone densitometry, are evaluated by our specialist physicians.

As a result of scanning, T and Z values are obtained. The values obtained are controlled by our specialist physicians.

After the evaluation, treatment is started quickly in case you have a health problem. In addition, the measurement results are obtained in a fairly short period of time.

Your bone density test results are reported using T-scores. The T-score shows how much higher or lower your bone density is than the bone density of a healthy 30-year-old adult. A healthcare provider looks at the lowest T score for an osteoporosis diagnosis.

According to the World Health Organization (WHO):

a T score of
• -1.0 or above is normal bone density. Examples are 0.9, 0 and -0.9.< / li>
• A T-score between -1.0 and -2.5 means that you have low bone density or osteopenia.Deciently, a T-score between -1.0 and -2.5 means that you have low bone density or osteopenia. Examples are -1.1, -1.6 and -2.4 T-scores.< / li>
  a T score
• -2.5 or below is a diagnosis of osteoporosis. Examples are -2.6, -3.3 and -3.9 T-scores. • The lower a person’s T-score, the lower their bone density. a T-score of -1.0 is lower than a T-score of 0.5, and a T-score of -3.5 is lower than a T-score of -3.0.< / li>

Your bone density test result also includes a Z-score that compares your bone density with what is normal for a person of your age and body size.

Low bone mineral density is common among older adults, which is why Z-scores can be Deciphering.

Most experts recommend using Z-scores instead of T-scores for children, teenagers, women who are still menstruating, and younger men.

The NOF does not recommend routine bone density testing in these age groups. According to the International Society of Clinical Densitometry (ISCD), a Z-score above -2.0 is normal.

The diagnosis of osteoporosis in younger men, premenopausal women and children should not be based solely on the result of a bone density test.

Having low bone density or osteopenia does not mean that you will get osteoporosis. This means that if you lose bones in the future, you have a higher chance of developing osteoporosis.

Although we know that people with osteoporosis should consider treatment to reduce the risk of broken bones, it is not always clear when people with low bone density will be treated.

Bone Densitometry Shooting Prices 2026

Bone measurement is performed to measure and detect the losses experienced in the bone mass of people and similar conditions. The prices of the procedure vary depending on the patients and the method.

In some patients, more extensive screening is required, while in some patients, simpler screening may be needed. At the same time, there are price differences in private and public health institutions. You can have this test performed to detect and treat bone loss at our health center. You can contact our health center for bone densitometry shooting prices 2026.